Government & DefensePrivate Label & Co-Packing
Where to BuyRequest a SampleContactSign In
0
Utility & ElectricalHealthcare & NursingArborists & Tree CareFood ProcessingElectronics & ESDFleet & Mechanics
ConstructionOil & GasFirst RespondersMilitary & VACleanroom & BioscienceEducationGeneral ManufacturingWeldingAll industries
IC ESD Safe Spray Trigger Bottles
IC ESD Safe Spray Trigger Bottles - Image 2
IC ESD Safe Spray Trigger Bottles - Image 3
IC ESD Safe Spray Trigger Bottles - Image 4
IC ESD Safe Spray Trigger Bottles - Image 5
IC ESD Safe Spray Trigger Bottles - Image 6
IC ESD Safe Spray Trigger Bottles - Image 7
IC ESD Safe Spray Trigger Bottles - Image 8
IC ESD Safe Spray Trigger Bottles - Image 9

IC ESD Safe Spray Trigger Bottles

$14.25

All of our Clean Room blue static dissipative solvent containers have an average surface resistivity of 10^9 to 10^10.

Request a free sampleCrew, distributor or GSA pricing

Government buyer? Buy on GSA Advantage → MAS contract 47QSMS24D0078

  • Made in the USAScottsdale, AZ, since 1983
  • FDA registered facilityNo. 3004167955
  • GSA contract holderGSA MAS contract 47QSMS24D0078
SKU: SCB-ESD
Technician wiping down a blue anti-static bench mat with a cloth and a blue spray bottle

Static control at the bench

Built for wiping down the bench

Spray cleaning solution or antistat on the mat, wipe, and set the bottle back down. It is static dissipative blue, so it belongs at the ESD workstation.

01
Adjustable sprayAn adjustable nozzle on a stainless-steel spring-action trigger gives a constant flow.
02
Will not corrodeThe pump will not corrode with repeated exposure to most chemicals.
03
Static dissipativeAverage surface resistivity of 109 to 1010 ohms/sq, in translucent ESD blue so you can see what is inside.

At a glance

Spray trigger bottle

16 · 32 ozSCB-16-ESD (case of 10) and SCB-32-ESD (case of 12).
MDPETranslucent ESD blue, molded with an antistatic additive free of amines and amides
109–1010Ω/sq average surface resistivity. Average static decay 0.5 s at 40% RH.
Solution or antistatFor dispensing cleaning solution or antistat, and for storing cleaning solutions or solvents.

Who uses it

Where it gets used

Electronics →
Electronics technician in a blue smock and wrist strap inspecting circuit boards under a microscope
ElectronicsAssembly and rework benches
 Scientist in a cleanroom gown working hand cream into her hands
Bio-scienceLabs and cleanrooms
 Line operator in safety glasses working lotion into her hands on the production floor
General manufacturingStatic-sensitive production
 Technician spraying from a blue spray bottle and wiping down a blue bench mat beside his soldering station
ElectronicsBench techs

Questions buyers ask

FAQ

What can I put in it?
It is made for dispensing cleaning solution or antistat and for storing cleaning solutions or solvents. Check the ESD Bottle Chemical Resistance Chart for your chemical.
How do I fill it?
Unfasten the pump from the bottle, fill with solution, refasten tightly and press to prime.
Can I fill it with IPA or other solvents?
MDPE is chemical resistant, and in a seven-day exposure test with TCE, MEK and IPA there was no color or physical change. Check the ESD Bottle Chemical Resistance Chart for your solvent. Some ESD bottles degrade over time depending on the solvent and how often they are used. The bottles are not ATEX rated.
What makes it static dissipative?
It is molded from MDPE with an antistatic additive that contains no amines or amides. Average surface resistivity is 109 to 1010 ohms/sq, with an average static decay of 0.5 seconds at 40% relative humidity. It supports an ANSI/ESD S20.20 program; it does not certify a workstation on its own.
Can I get samples, pricing or buy through GSA?
Yes. Request a sample, ask about distributor and case pricing, or buy SCB-16-ESD and SCB-32-ESD through GSA MAS contract 47QSMS24D0078.

The details

Spray, wipe and set it back on the bench

I.C. ESD Spray Trigger Bottles are for wiping down ESD mats, benches and equipment in electronics assembly, cleanrooms and other static-sensitive work areas. Fill one with your cleaning solution or antistat, spray, wipe, and set the bottle back down at the workstation.

An adjustable spray nozzle sets the pressure, the trigger can be pulled part way for control, and the stainless-steel spring-action pump gives a constant flow that will not corrode with repeated exposure to most chemicals. The static dissipative blue bottle has an average surface resistivity of 10⁹ to 10¹⁰ Ω/sq and an average static decay of 0.5 seconds at 40% RH.

Choose 16 oz (SCB-16-ESD, case of 10) or 32 oz (SCB-32-ESD, case of 12). Both are on GSA MAS contract 47QSMS24D0078. I.C. ESD bottles are molded from MDPE compounded with an ESD additive that gives them their blue tint and static dissipative property, and they are supplied by R&R Lotion of Scottsdale, Arizona, since 1983.

Features & benefits

  • Adjustable nozzleSet the spray pattern and pressure at the nozzle.
  • Trigger controlPull part way for control over the spray.
  • Non-corroding pumpThe stainless-steel spring-action pump will not corrode with repeated exposure to most chemicals and solvents.
  • Full-length strawReaches the corner of the bottle, leaving little solution behind.
  • Static dissipativeAverage surface resistivity of 10⁹ to 10¹⁰ Ω/sq, with an average static decay of 0.5 seconds at 40% RH.
  • Supports an S20.20 programSupports an ANSI/ESD S20.20 program. The bottle does not certify a workstation on its own.
  • Amine and amide freeThe antistatic additive contains no amines, amides or ethoxylated tertiary amine, the agent used in many other antistatic bottles.
  • Durable MDPEMedium-density polyethylene is durable and chemical resistant.
  • Grip-right materialFlexible walls give precise, even resistance in the hand.
  • Leak-proof fitEach molding is fitted to its matching top and seals when closed.
  • Into the ESD areaBring liquids and supplies into static-sensitive areas in a static dissipative container, and keep them within reach at the workstation.
  • ESD blue, translucentThe ESD blue tint is easy to spot, and the translucent wall shows contents and fill level.
  • Clean plasticMade with no BPA, PBDE, phthalates or heavy metals.
  • Non-stick surfaceContents release cleanly from the plastic surface.
  • Odor resistantDoes not hold trace odors or fragrances left by solvents and other chemicals.
  • Top-rack washableWash on the top rack of a dishwasher and reuse.
  • RecyclableThe material is formulated to be recyclable and reusable.

Uses (from the label)

  • Cleanrooms and sterile environments
  • Dispensing cleaning solution or antistat
  • Storing cleaning solutions or solvents
Free ofBPAPhthalatesPVCPBDEHeavy metalsAmines and amides

Sizes & case packs

SizePart no.Per case
16 oz spray trigger bottleSCB-16-ESD10
32 oz spray trigger bottleSCB-32-ESD12

Directions for use

  1. Unfasten the pump from the bottle to fill the ESD bottle with solution.
  2. Tightly refasten the pump and press to prime the solution.

Applications

Electronics manufacturingCleanroomsStatic-sensitive environmentsSemiconductor and quality labsBio-science labsAerospace and defense

Testing on file

  • Static decay, 5 kV at 40% RHAverage 0.05 s to the 1% cutoff (min 0.04 s, max 0.07 s); 0.03 s average to 10%.
  • Surface resistivity, ASTM D2571.97 × 10¹⁰ Ω/sq average at 100 V and 40% RH.
  • Surface resistance, 100 V at 40% RH5.51 × 10⁸ Ω average (1% cutoff).
  • Static decay, packaging material5 kV at 15% RH: PVC sleeve 0.35 s, PE foam 0.17 s, PS foam 0.17 s.
  • Solvent residue, seven-day exposureTCE, MEK and IPA: no color or physical change; water pH unchanged (about 5.9).
  • Electro-Tech Systems, 2015Surface resistivity at 40% RH (ASTM D257 / ESD S11.11) in the static dissipative range; static decay at 12% RH (Mil-Std-3010C Method 4046) to the 1% cutoff in about 0.01 s.

Product specs

Product type
Static dissipative bottle (hardware)
Material
MDPE with an antistatic additive (amine and amide free)
Color
ESD blue, translucent
Surface resistivity
10⁹ to 10¹⁰ Ω/sq (average)
Static decay
0.5 s average at 40% RH
ESD program
Supports an ANSI/ESD S20.20 program; does not certify a workstation on its own
Standards (per TDS)
Exceeds MIL-B-81705 and NFPA-56A (FTMS 101, Method 4046); tested to ESD ADV 11.21; meets EIA 625; helps meet ANSI/ESD S4.1; DOD-HDBK-263
Food-contact material
MDPE and additive comply with 21 CFR 177.1520, 178.2010, 178.3297 and 178.3120
Chemical compatibility
See the ESD Bottle Chemical Resistance Chart, rrlotion.com/esd-bottle-chemical-resistance-chart/
Flammable liquids
Not ATEX rated
Regulatory lists
Prop 65, TSCA, SARA, REACH, RoHS: no known substances
Shelf life
At least 24 months from manufacture. Some ESD bottles degrade over time depending on the solvent and frequency of use.
Cleaning
Top rack of a dishwasher
SDS
ESD Bottles SDS, rrlotion.com/msds/
Supplied by
R&R Lotion, Scottsdale, AZ, since 1983 · FDA registered facility No. 3004167955
GSA
MAS contract 47QSMS24D0078: SCB-16-ESD, SCB-32-ESD

Reviews

There are no reviews yet.

Be the first to review “IC ESD Safe Spray Trigger Bottles”

Your email address will not be published. Required fields are marked *

For safety managers & buyers

Spec sheets, SDS & test reports

Everything your safety team or purchasing department needs, ready to download.