Government & DefensePrivate Label & Co-Packing
Where to BuyRequest a SampleContactSign In
0
Utility & ElectricalHealthcare & NursingArborists & Tree CareFood ProcessingElectronics & ESDFleet & Mechanics
ConstructionOil & GasFirst RespondersMilitary & VACleanroom & BioscienceEducationGeneral ManufacturingWeldingAll industries
FD Chisel Pen Tips - flux pen chisel tips

FD Chisel Pen Tips

$6.49

All of our Clean Room blue static dissipative solvent containers have an average surface resistivity of 10^9 to 10^10. 5 tips per pack. Bottle not included.  

Request a free sampleCrew, distributor or GSA pricing
  • Made in the USAScottsdale, AZ, since 1983
  • FDA registered facilityNo. 3004167955
  • GSA contract holderGSA MAS contract 47QSMS24D0078
SKU: FD-PEN-TIP
Electronics technician in a blue smock and wrist strap inspecting circuit boards under a microscope

Spare parts for the flux pen

Built to keep the flux pen going

Replacement chiseled tips for the I.C. 2 oz pen-tip flux dispenser. Swap a worn tip and keep the same bottle on the bench.

01
Chisel tipA chiseled tip for a precise, consistent spread of flux.
02
Fits the pen dispenserMade for the FD-PEN-ESD 2 oz flux dispenser; the tip grips the Luer-lock hub and seals.
03
5 per packTips only. The bottle is not included.

At a glance

Chisel pen tips

5-packFD-PEN-TIP replacement chisel pen tips.
ChiselChiseled pen tip for spreading flux.
FD-PEN-ESDFits the 2 oz pen-tip flux dispenser.
No bottleTips only. Order the dispenser separately.

Who uses it

Where it gets used

Electronics →
Electronics technician in a blue smock and wrist strap inspecting circuit boards under a microscope
ElectronicsAssembly and rework benches
 Line operator in safety glasses working lotion into her hands on the production floor
General manufacturingStatic-sensitive production
 Cleanroom technician in a hooded suit, safety glasses and wrist strap dispensing from a small bottle at an electronics bench
Bio-scienceCleanrooms
 Soldering iron tip being re-tinned in a small tin beside the soldering station
ElectronicsSolder stations

Questions buyers ask

FAQ

What does it fit?
The FD-PEN-ESD 2 oz pen-tip flux dispenser.
Is the bottle included?
No. FD-PEN-TIP is a pack of 5 tips only.
How do I change the tip?
Unfasten the nozzle from the bottle, draw the new chiseled tip through the nozzle, and fasten the nozzle back on.
Are the tips static dissipative?
The static dissipative rating (109 to 1010 ohms/sq) applies to the blue bottle. We do not publish a separate ESD value for the tip.
Can I get pricing or buy through GSA?
Yes. Ask about distributor pricing. The tip pack is not on our GSA schedule, but the FD-PEN-ESD dispenser is available through GSA MAS contract 47QSMS24D0078.

The details

Spare tips for the flux pen

FD-PEN-TIP is a pack of five replacement chiseled tips for the I.C. 2 oz ESD pen-tip flux dispenser (FD-PEN-ESD). When a tip wears, swap it and keep the same bottle on the bench.

The chiseled tip grips tightly onto the dispenser's Luer-lock hub and seals for dispensing, for a precise, consistent spread of flux. It is used with flux, no-clean, water-soluble, rosin and acid solutions.

The pack contains tips only; order the dispenser separately. The static dissipative rating on the TDS applies to the blue bottle. The FD-PEN-ESD dispenser is on GSA MAS contract 47QSMS24D0078; the tip pack is not. Supplied by R&R Lotion of Scottsdale, Arizona, since 1983.

Features & benefits

  • Chisel tipA chiseled tip for a precise, consistent spread of flux.
  • Seals on the hubGrips tightly onto the Luer-lock hub and seals for dispensing.
  • Flux compatibleFor flux, no-clean, water-soluble, rosin and acid solutions.
  • Five per packFive replacement tips, no bottle.
  • Keep the bottleReplace a worn tip instead of the whole dispenser.

Uses (from the label)

  • Replacing worn tips on the FD-PEN-ESD 2 oz flux dispenser
  • Spreading flux onto circuit boards

Sizes & case packs

SizePart no.Per case
Chiseled pen tips, 5-pack (no bottle)FD-PEN-TIP1

Directions for use

  1. Unfasten the nozzle from the bottle.
  2. Draw the new chiseled tip through the nozzle.
  3. Fasten the nozzle back on and squeeze to dispense flux.

Applications

Electronics manufacturingRework and repairCleanrooms

Product specs

Product type
Replacement chiseled pen tips (hardware)
Fits
FD-PEN-ESD 2 oz ESD flux dispenser, Luer-lock hub
Pack
5 tips, no bottle
Flux compatibility
Flux, no-clean, water-soluble, rosin and acid solutions
Supplied by
R&R Lotion, Scottsdale, AZ, since 1983

Reviews

There are no reviews yet.

Be the first to review “FD Chisel Pen Tips”

Your email address will not be published. Required fields are marked *

For safety managers & buyers

Spec sheets, SDS & test reports

Everything your safety team or purchasing department needs, ready to download.