Government & DefensePrivate Label & Co-Packing
Where to BuyRequest a SampleContactSign In
0
Utility & ElectricalHealthcare & NursingArborists & Tree CareFood ProcessingElectronics & ESDFleet & Mechanics
ConstructionOil & GasFirst RespondersMilitary & VACleanroom & BioscienceEducationGeneral ManufacturingWeldingAll industries
Square ESD Storage Bottles
Square ESD Storage Bottles - Image 2
Square ESD Storage Bottles - Image 3
Square ESD Storage Bottles - Image 4
Square ESD Storage Bottles - Image 5
Square ESD Storage Bottles - Image 6
Square ESD Storage Bottles - Image 7
Square ESD Storage Bottles - Image 8
Square ESD Storage Bottles - Image 9

Square ESD Storage Bottles

$9.70

All of our Clean Room blue static dissipative solvent containers have an average surface resistivity of 10^9 to 10^10.  

Request a free sampleCrew, distributor or GSA pricing

Government buyer? Buy on GSA Advantage → MAS contract 47QSMS24D0078

  • Made in the USAScottsdale, AZ, since 1983
  • FDA registered facilityNo. 3004167955
  • GSA contract holderGSA MAS contract 47QSMS24D0078
SKU: SQB-ESD
Cleanroom technician in a hooded suit, mask and gloves dispensing lotion from a plain blue bottle

Static control at the bench

Built for powders and solids

A square blue bottle with a lid for lab powders and solid product. It packs tight on a shelf and stays static dissipative inside the ESD area.

01
Easy to scoopThe square design allows compact storage and easy extraction of powder or other solid contents.
02
Seals with a lidTighten the lid to seal and store contents.
03
Static dissipativeAverage surface resistivity of 109 to 1010 ohms/sq, in translucent ESD blue so you can see what is inside.

At a glance

Square storage bottle

4 · 6 · 8 · 16 ozSQB-4-ESD, SQB-6-ESD, SQB-8-ESD (case of 50) and SQB-16-ESD (case of 12), each with a lid.
MDPETranslucent ESD blue, molded with an antistatic additive free of amines and amides
109–1010Ω/sq average surface resistivity. Average static decay 0.5 s at 40% RH.
160°FHolds contents up to 160°F. Washes on the top rack of a dishwasher.

Who uses it

Where it gets used

Electronics →
Electronics technician in a blue smock and wrist strap inspecting circuit boards under a microscope
ElectronicsAssembly and rework benches
 Scientist in a cleanroom gown working hand cream into her hands
Bio-scienceLabs and cleanrooms
 Line operator in safety glasses working lotion into her hands on the production floor
General manufacturingStatic-sensitive production
 Technician wiping down a blue anti-static bench mat with a cloth and a blue spray bottle
ElectronicsESD coordinators

Questions buyers ask

FAQ

What is it for?
Storing solid product or powder, and storing cleaning solutions or solvents, in a cleanroom or static-sensitive area.
Square or round storage bottle?
Square bottles store compactly and make powders easy to get out. The round storage bottles are made for liquids and gels.
How do I clean it?
Wash it on the top rack of a dishwasher and reuse it. The bottle material contains no BPA, phthalates or heavy metals.
What makes it static dissipative?
It is molded from MDPE with an antistatic additive that contains no amines or amides. Average surface resistivity is 109 to 1010 ohms/sq, with an average static decay of 0.5 seconds at 40% relative humidity. It supports an ANSI/ESD S20.20 program; it does not certify a workstation on its own.
Can I get samples, pricing or buy through GSA?
Yes. Request a sample, ask about distributor and case pricing, or buy SQB-4-ESD and SQB-16-ESD through GSA MAS contract 47QSMS24D0078.

The details

Powders and solids, packed tight on the shelf

I.C. ESD Square Storage Bottles hold lab powders and solid product, as well as cleaning solutions and solvents, in cleanrooms, sterile areas and static-sensitive workstations. The square, open-top design stores compactly on a shelf and makes it easy to scoop out powder or other solids.

The lid tightens to seal contents in. The bottle is static dissipative, with an average surface resistivity of 10⁹ to 10¹⁰ Ω/sq and an average static decay of 0.5 seconds at 40% RH, and it holds contents up to 160°F. Its antistatic concentrate contains no ethoxylated tertiary amine, the agent widely used in other antistatic bottles.

Sizes run 4, 6, 8 and 16 oz (SQB-4-ESD, SQB-6-ESD and SQB-8-ESD at 50 per case; SQB-16-ESD at 12), each with a lid. SQB-4-ESD and SQB-16-ESD are on GSA MAS contract 47QSMS24D0078. I.C. ESD bottles are molded from MDPE compounded with an ESD additive that gives them their blue tint and static dissipative property, and they are supplied by R&R Lotion of Scottsdale, Arizona, since 1983.

Features & benefits

  • Sealed storageStore powders, balms or creams in a sealed, static dissipative container.
  • Compact square shapePacks tight on a shelf, and the open top makes powders easy to scoop out.
  • Static dissipativeAverage surface resistivity of 10⁹ to 10¹⁰ Ω/sq, with an average static decay of 0.5 seconds at 40% RH.
  • Supports an S20.20 programSupports an ANSI/ESD S20.20 program. The bottle does not certify a workstation on its own.
  • Amine and amide freeThe antistatic additive contains no amines, amides or ethoxylated tertiary amine, the agent used in many other antistatic bottles.
  • Durable MDPEMedium-density polyethylene is durable and chemical resistant.
  • Holds up to 160°FCan hold contents at temperatures up to 160°F.
  • Grip-right materialFlexible walls give precise, even resistance in the hand.
  • Leak-proof fitEach molding is fitted to its matching top and seals when closed.
  • Into the ESD areaBring liquids and supplies into static-sensitive areas in a static dissipative container, and keep them within reach at the workstation.
  • ESD blue, translucentThe ESD blue tint is easy to spot, and the translucent wall shows contents and fill level.
  • Clean plasticMade with no BPA, PBDE, phthalates or heavy metals.
  • Non-stick surfaceContents release cleanly from the plastic surface.
  • Odor resistantDoes not hold trace odors or fragrances left by solvents and other chemicals.
  • Top-rack washableWash on the top rack of a dishwasher and reuse.
  • RecyclableThe material is formulated to be recyclable and reusable.

Uses (from the label)

  • Cleanrooms and sterile environments
  • Storing solid product or powder
  • Storing cleaning solutions or solvents
Free ofBPAPhthalatesPVCPBDEHeavy metalsAmines and amides

Sizes & case packs

SizePart no.Per case
4 oz square bottle with lidSQB-4-ESD50
6 oz square bottle with lidSQB-6-ESD50
8 oz square bottle with lidSQB-8-ESD50
16 oz square bottle with lidSQB-16-ESD12

Directions for use

  1. Unfasten lid from bottle to fill the ESD bottle with product, solution or solvent.
  2. Tightly refasten the lid to seal and store contents from contamination or electric discharge.

Applications

Electronics manufacturingCleanroomsStatic-sensitive environmentsSemiconductor and quality labsBio-science labsAerospace and defense

Testing on file

  • Static decay, 5 kV at 40% RHAverage 0.05 s to the 1% cutoff (min 0.04 s, max 0.07 s); 0.03 s average to 10%.
  • Surface resistivity, ASTM D2571.97 × 10¹⁰ Ω/sq average at 100 V and 40% RH.
  • Surface resistance, 100 V at 40% RH5.51 × 10⁸ Ω average (1% cutoff).
  • Static decay, packaging material5 kV at 15% RH: PVC sleeve 0.35 s, PE foam 0.17 s, PS foam 0.17 s.
  • Solvent residue, seven-day exposureTCE, MEK and IPA: no color or physical change; water pH unchanged (about 5.9).
  • Electro-Tech Systems, 2015Surface resistivity at 40% RH (ASTM D257 / ESD S11.11) in the static dissipative range; static decay at 12% RH (Mil-Std-3010C Method 4046) to the 1% cutoff in about 0.01 s.

Product specs

Product type
Static dissipative bottle (hardware)
Material
MDPE with an antistatic additive (amine and amide free)
Color
ESD blue, translucent
Surface resistivity
10⁹ to 10¹⁰ Ω/sq (average)
Static decay
0.5 s average at 40% RH
Temperature
Holds contents up to 160°F
ESD program
Supports an ANSI/ESD S20.20 program; does not certify a workstation on its own
Standards (per TDS)
Exceeds MIL-B-81705 and NFPA-56A (FTMS 101, Method 4046); tested to ESD ADV 11.21; meets EIA 625; helps meet ANSI/ESD S4.1; DOD-HDBK-263
Food-contact material
MDPE and additive comply with 21 CFR 177.1520, 178.2010, 178.3297 and 178.3120
Chemical compatibility
See the ESD Bottle Chemical Resistance Chart, rrlotion.com/esd-bottle-chemical-resistance-chart/
Flammable liquids
Not ATEX rated
Regulatory lists
Prop 65, TSCA, SARA, REACH, RoHS: no known substances
Shelf life
At least 24 months from manufacture. Some ESD bottles degrade over time depending on the solvent and frequency of use.
Cleaning
Top rack of a dishwasher
SDS
ESD Bottles SDS, rrlotion.com/msds/
Supplied by
R&R Lotion, Scottsdale, AZ, since 1983 · FDA registered facility No. 3004167955
GSA
MAS contract 47QSMS24D0078: SQB-4-ESD, SQB-16-ESD

Reviews

There are no reviews yet.

Be the first to review “Square ESD Storage Bottles”

Your email address will not be published. Required fields are marked *

For safety managers & buyers

Spec sheets, SDS & test reports

Everything your safety team or purchasing department needs, ready to download.