IC Alcohol Free Foaming Hand Sanitizer - Image 2

IC Alcohol Free Foaming Hand Sanitizer - Image 3

IC Alcohol Free Foaming Hand Sanitizer - Image 4

IC Alcohol Free Foaming Hand Sanitizer - Image 5

IC Alcohol Free Foaming Hand Sanitizer - Image 6

IC Alcohol Free Foaming Hand Sanitizer - Image 7

IC Alcohol Free Foaming Hand Sanitizer - Image 8

Foaming Sanitizers

IC Alcohol Free Foaming Hand Sanitizer

4.0 on Amazon · 22 ratings

— or from / month

IC Foaming Hand Sanitizer is alcohol-free and uses benzalkonium chloride to help decrease bacteria on the skin.

Size

Clear

Request a free sample Crew, distributor or GSA pricing

Government buyer? Buy on GSA Advantage → MAS contract 47QSMS24D0078

Made in the USAScottsdale, AZ, since 1983
FDA registered facilityNo. 3004167955
GSA contract holderGSA MAS contract 47QSMS24D0078

Food plant worker in a hairnet pumping foam sanitizer from a wall dispenser

Alcohol-free foam

Built for the wash-and-sanitize routine

Wash, rinse, sanitize, back to the line. A light foam that dries fast and leaves no sticky film.

FastKills 99.99% of most common germs and is effective in as little as 15 seconds.

No alcoholBenzalkonium chloride 0.1% is the active. Non-flammable, with no VOCs and no hazmat shipping.

Made for food plantsNSF registered E3. After use in food areas, no potable-water rinse is required.

Key ingredients

What’s inside, and what it does

One active and a short list of conditioners, with no alcohol. Here is what each one does.

Full ingredient list →

Active ingredient · antimicrobial
Benzalkonium Chloride 0.1%
For hand sanitizing to decrease bacteria on the skin. Recommended for repeated use.
What it does Benzalkonium Chloride
Benzalkonium chloride, often shortened to BZK, is a widely used antiseptic. It is the only active ingredient on the Drug Facts panel, and it is used in place of alcohol in alcohol-free sanitizers.
Conditioning agent
Dihydroxypropyl PEG-5 Linoleammonium Chloride
A conditioner that helps improve how skin feels.
What it does Dihydroxypropyl PEG-5 Linoleammonium Chloride
This ingredient is a conditioning agent built on linoleic acid, a fatty acid found in many plant oils. In personal care products it helps leave skin and hair feeling soft.
Foaming agent
Dihydroxyethyl Cocamine Oxide
A mild surfactant made from coconut fatty acids that helps build a light foam.
What it does Dihydroxyethyl Cocamine Oxide
Amine oxides like this one are mild cleansing and foam-boosting ingredients. Here it helps the formula leave the pump as a foam that spreads easily over the hands.

Also inside Behentrimonium chloride, a second conditioning ingredient.

Ready to put it to work?Pick a size, or try a free sample with your crew first.

Choose a size & add to cart Request a free sample

Ingredient notes describe what each ingredient generally does. The full ingredient list and Drug Facts are in the details below; the package label is the most current.

The numbers

Tested, not just claimed

99.99%Of most common germs killed (label)

15 secEffective in as little as 15 seconds (label)

NSF E3NSF registered no-rinse hand sanitizer for food processing areas, Reg. No. 149782

>200 ppmAvailable chlorine equivalent above the 200 ppm NaOCl standard control, against S. aureus and Salmonella typhi

How it works

A foam instead of an alcohol gel

The same job as a gel sanitizer, without the alcohol.

The activeBenzalkonium chloride

BZK is a quaternary ammonium antiseptic. It works on contact, and unlike alcohol it isn’t flammable. Here it’s at 0.1%.

The feelConditioners in the foam

Skin conditioners leave hands feeling soft and refreshed. The foam rubs in and dries without stickiness or residue.

What’s not in itNo fragrance or dye

Free of alcohol, fragrance, dyes and parabens. Never tested on animals.

Who uses it

In schools, clinics, plants and front desks

HospitalityHousekeeping

Questions crews ask

FAQ

How fast does it work?

The label says it kills 99.99% of most common germs and is effective in as little as 15 seconds. Pump a small amount into your palm and rub it over all surfaces of both hands until dry.

How do we use it in a food plant?

It is NSF registered (category E3, Reg. No. 149782) for use in and around food processing areas. Per the label, use it only after washing hands with soap or detergent and water and rinsing with potable water. No potable-water rinse is needed after the sanitizer.

Does it need flammable-liquid storage?

No. It’s alcohol-free and non-flammable, with no VOCs, and it isn’t hazmat.

Does it have a scent?

No. It’s fragrance-free and dye-free.

Is the 2 oz spray a different product?

No. The 2 oz spray bottle is the same alcohol-free formula and the same Drug Facts. Spray a small amount into your palm, rub it over both hands, and rub until dry.

What sizes are there?

A 50 mL foaming pump, a 2 oz spray bottle, a 20 oz foaming pump bottle, and a 1 gallon refill.

Can I get samples, crew pricing or buy through GSA?

Yes. Request a free sample, ask about crew and distributor pricing, or buy through GSA MAS contract 47QSMS24D0078.

The details

A light, alcohol-free foam for the wash-and-sanitize routine

I.C. Alcohol-Free Foaming Hand Sanitizer is the gentler, alcohol-free alternative for people who sanitize again and again through the day: food plant crews coming off the wash sink, dental and medical staff between patients, teachers, front desks and housekeeping. It is made for professional use across medical, pharmaceutical, production and food service settings.

The active is benzalkonium chloride (BZK 0.1%), which kills 99.99% of common germs, and skin conditioners in the foam help keep hands from drying out. Compared with gelled alcohol sanitizers it is non-flammable, less drying to the skin and will not sting cracked, raw hands. The feather-light foam rubs in quickly and leaves no sticky residue, it is fragrance-free and dye-free, and you can use it before putting on nitrile, latex or vinyl gloves.

It is NSF registered (category E3, Reg. No. 149782) as a no-rinse hand sanitizer for use in and around food processing areas, after washing and rinsing hands. With no alcohol it has no VOCs and ships non-hazmat. Made in our FDA registered facility in Scottsdale, Arizona, it comes as a 50 mL foaming pump, a 2 oz spray bottle (same formula), a 20 oz foaming pump bottle and a gallon refill, direct, through distributors and on GSA MAS contract 47QSMS24D0078.

Features & benefits

Kills 99.99% of germsBenzalkonium chloride 0.1% kills 99.99% of common germs.
Fast actingKills germs in as little as 15 seconds.
Alcohol-freeNo alcohol, so none of the drying, cracking and skin irritation that alcohol can cause.
Will not stingLess drying than gelled alcohol sanitizers and will not sting cracked or raw hands.
MoisturizingSkin conditioners soften hands and help keep them from drying or cracking.
Feather foamA gentle, non-agitating foaming application.
Quick dryingDries right after application.
No sticky residueDisappears from the skin and leaves nothing tacky behind.
Non-flammableNo alcohol, no VOCs and non-hazmat to ship and store.
Pre-glove useUse before putting on nitrile, latex or vinyl gloves.
Food plant registeredNSF registered (E3) no-rinse hand sanitizer for use in and around food processing areas, Reg. No. 149782.
Fragrance-freeOdorless, with no artificial fragrance and no dyes.
Skin safety dataNot a skin sensitizer in skin safety testing on file.
Foam or sprayFoaming pumps and refills for walls and counters, and a 2 oz spray of the same formula for pockets and kits.

Uses (from the label)

For hand sanitizing to decrease bacteria on the skin
Recommended for repeated use

Free ofAlcoholParabensFragranceDyesTriclosanAnimal testing

Ingredients

Active ingredient	Amount	Purpose
Benzalkonium Chloride	0.1%	Antimicrobial

Inactive ingredients: DI Water, Dihydroxypropyl PEG-5 Linoleammonium Chloride, Glycereth-2 Ocoate, Behentrimonium Chloride, Dihydroxyethyl Cocamine Oxide

Sizes & case packs

Size	Part no.	Per case
50 mL foaming pump	`ICHS-50ML`	16
2 oz bottle, spray	`ICHS-2`	24
20 oz foaming pump bottle	`ICHS-20`	8
1 gallon foaming refill bottle	`ICHS-GAL`	4

Directions for use

Foam (50 mL, 20 oz, gallon): pump a small amount of foam into the palm of your hand.
Rub thoroughly over all surfaces of both hands.
Rub hands together briskly until dry.
Spray (2 oz): spray a small amount into the palm of your hand, rub thoroughly over both hands and rub hands together until dry.
In food processing areas, use only after thoroughly washing hands with soap or detergent and water and rinsing with potable water. No potable water rinse is required after use.

Warnings: For external use only. When using this product avoid contact with eyes. If contact with eyes, flush with water. Stop use and ask a doctor if irritation or redness develops, or if condition persists for more than 72 hours. Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away.

Applications

Food service and processingHealthcareDentistryNursing homesEducationOfficeHospitalityGovernmentElectronicsIndustrialFacility maintenance

Testing on file

Kill-time study, 30 seconds13 organisms including MRSA, VRE, Listeria, E. coli, Salmonella and Pseudomonas: 99.99% to 99.9999% for most organisms tested
NSF E3NSF Nonfood Compounds Program, Reg. No. 149782: no-rinse hand sanitizer in and around food processing areas
Chlorine equivalencyAvailable chlorine equivalent greater than the 200 ppm NaOCl standard control against S. aureus and Salmonella typhi
Skin safetyNot a skin sensitizer; skin irritation Category IV, eye irritation Category III

Product specs

Product type: Foaming liquid, OTC antiseptic hand sanitizer
Color / odor: Colorless / odorless
pH: 5.0 – 6.0
Flammability: Non-flammable · no VOCs · non-hazmat
Shelf life: 24 months unopened at room temperature; 24 months after opening
Storage: Keep between 32°F and 150°F
NSF: Registered, category E3, Reg. No. 149782
Made in: Scottsdale, AZ, USA · FDA registered facility No. 3004167955

Professional Outdoor

Healthcare & Hygiene

Facility Maintenance

ESD & Cleanroom